I know this is an old thread but, it has solves a big problem for me and wanted to give you a shout out for this. That your settings and cutter if not Cam ‘ed properly will cause FUSION To error and delete You could go bigger with the lead in and cut stock clearance, I just wanted to demonstrate And how these settings make it fit without fail. Zoomed up u can see the green arc with the lead in and arc in. You’ll have to tweak the setup even more to get the cutter to fit with the bigger kerf width cut. Set everything in Manufactuer and it simulated and toolpathed everything without issue. And also indicating a counter clockwise Cut Zoom way in the the Stars and see if the Arrows are starting inside the stars. Then I SAVE the file as a dxf with the stroke set back down to. Then I can see if my cutter can fit and not melt away areas when it would cut When I design a sketch I set my stoke line width in INKSCAPE to the Kerf width of my cutter nozzle. it can’t fit inside with any or one or more of the settings. maybe be to large for fusion to tool path those stars, ie. Lead in, lead out, material cleanace, pierce clearance etc. & if you want FUSION selecting your geometry for CAM toolpathing you need outside selected not inside. Make sure settings are left And in-computer compensation. Your error mostly means something in your Cam setup can’t be done with your current settings. Blue Arrow showing a counterclockwise rotation for the cutter not clockwise. You can delete the other profiles in the box for less clutter.Īlso this question should have gone into a separate topic as it is off topic for this thread.Ģ2618A93-7382-446C-A298-79B77FCFFA54.jpeg 2016×1512 800 KB All the interior cuts ie.
If the CrossFire Mach3 Profile (v1.1) is in the correct folder it will see it in this box and can select it as an option and click okay. Now when you launch Mach 3 you will first see a Profile Selection box.
Download (Right-click, ‘Save Link As’) Move into Mach3 folder (Usually C:/Mach3) Download and move into Mach3 Plugins folder (Usually C:/Mach3/Plugins)ĬrossFire Mach3 Profile (v1.1). The computer that then runs the table (may same computer you use for fusion) assuming it is dedicated to table.ĬrossFire Mach3 USB Motion Controller Plugin (v1.0). The USB cable connects you PC or laptop to this and this then interfaces with your stepper motors. The electronic enclosure is the box mounted to the frame just bellow the Y axis stepper motor. I cant say I fully understand the question.
0 kommentar(er)
